Brief introduction of SUS405 stainless steel plate:
SUS405 is the one with the lowest Cr content in ferritic stainless steel.
SUS405 stainless steel has good plasticity, toughness and cold formability, and is superior to other ferritic stainless steels with higher Cr content.
When the C content in SUS405 steel is controlled very low, its plasticity, especially toughness, and cold formability will be significantly improved.
SUS405 steel is mainly used to manufacture parts and equipment lining that are resistant to water vapor and hot sulfur-containing petroleum corrosion.
Characteristics: Used as parts with high toughness and impact load.
Uses: such as steam turbine blades, structural frames, stainless equipment, linings, bolts, nuts, etc.
We Xinsteel take this opportunity to introduce ourselves as one of the leading supplier to provide you SUS405 stainless steel plate and sheet under JISG4304. the spefication we offer as following:
Stainless steel sheet and plate
SUS405 stainless sheet and coil specification:
Thickness: 1mm-6mm
Width: 500mm-2500mm(cut according to customer’s request)
Length: 500mm-12000mm or coil
Process: HR, CR
Minimum order: 100kg
SUS405 stainless plate specification:
Thickness: 6mm-200mm
Width: 500mm-4200mm
Length: 500mm-12000mm
Process: Hot Rolled
Minimum order:1 piece
Chemical composition:
|
JIS G4304 |
Elements % |
||||||||
|
C≤ |
Mn≤ |
P ≤ |
S ≤ |
Si≤ |
Cr |
Ni |
Mo |
Al |
|
|
SUS405 stainless steel plate |
0.080 |
1.0 |
0.040 |
0.030 |
1.0 |
11.50-14.50 |
11.0-15.0 |
0.1-0.3 |
|
Stainless steel plate SUS405 Mechanical Properties:
|
Tensile Strength, MPa |
Yield Strength, MPa |
Elongation, % |
Hardness, HRB |
|
410min |
175min |
20 min |
88 max |
Xinsteel industrial Co.,Limited , All Rights Reserved. T:0086-371-55057610 F:0086-371-55057612
ADD:No.88 Beihuan Road,Jinshui District,Zhengzhou City,Henan Province in China